Fuchs Renolin PG 460 is a fully-synthetic EP industrial gear oil
Fuchs Renolin PG 460 is a Fully synthetic EP industrial gear oils based on special, selected polyglycols (PAG)
Description
The FUCHS RENOLIN PG oils are fully synthetic industrial gear oils based on special, newly developed
polyglycol base oils. Thus the RENOLIN PG products offer a very high oxidation and temperature
stability. Polyglycols have a very good viscositytemperature-behaviour (high natural, shear-stable
VI) and can therefore be used within a wide temperature range (depending on the viscosity
grade and the working conditions from – 35 °C up to 160 °C). Special additives adapted to
these polyglycols further improve the good properties of the base oils – high wear protection,
excellent corrosion protection also at the presence of condensation water, low foaming, very good
compatibility with non-ferrous metals. The excellent anti-wear properties could be proven
in different tests with RENOLIN PG. The load stage> 14 was passed in the standard FZG test (FZG A/8.3/90), and the load stage > 12 was passed in the FZG test A/16.6/140 (high speed, high temperature
FZG test). RENOLIN PG has a high micropitting resistance – load stage “high” – and a good pitting
resistance. RENOLIN PG was tested in a special “low speed” FZG test (according to DGMK
(Deutsche Wissenschaftliche Gesellschaft für Erdöl, Erdgas und Kohle e.V.) – FZG scuffing test) which
RENOLIN PG passed with excellent results (wear category: “low” = excellent). This special test shows
the excellent wear protection of RENOLIN PG at two different temperatures (90 °C and 120 °C) under
mixed and boundary lubrication conditions. The lubricating film remains stable even at high
pressures and under mixed friction conditions. Thus the friction coefficient is low, and a temperature reduction by up to 20 °C can be achieved compared with mineral oil-based lubricants.
Efficiency tests in a worm gear test rig demonstrated the high performance and the low friction coefficient
which is especially of great importance for the use in worm gears. The results of RENOLIN PG in the FE8
roller bearing wear test were excellent. Tests in a special test rig at the University of Munich (FZG
Institute – Forschungsstelle für Zahnräder und Getriebebau) led to excellent results regarding
antiwear behaviour and efficiency.
Note
RENOLIN PG is not miscible and compatible with mineral oils, ester oils and polyalphaolefins. When
changing between polyglycols from different manufacturers, the compatibility has to be checked.
Before changing-over, it is recommended to clean the system and to flush with RENOLIN PG. The
compatibility with elastomers, varnishes and coatings should also be checked before changing
from mineral oil to polyglycols. The specifications of the roller bearing and gear manufacturers have to be
observed. In general these oils should not be used for dynamic frictional contact with aluminium.
Application
The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller
bearings and friction bearings which are subject to high mechanical and thermal stress. Especially in applications with high sliding velocities (e.g. worm gear units) the RENOLIN PG oils offer advantages
compared with mineral oil-based gear oils. Due to the high oxidation stability, the oil change intervals
can be extended and the maintenance costs can be reduced also at higher operating temperatures. The
use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear.
The RENOLIN PG products can also be used for paper machines, calenders, conveying machines
and milling bearings. Peak temperatures of up to 200 °C are temporarily tolerable.
Specifications
The RENOLIN PG products fulfill and exceed the minimum requirements according to:
– DIN 51517-3 (2004): CLP-PG
– ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE / (CKS) / CKT
– AGMA 9005/E02: EP
Among others, the RENOLIN PG products are approved by:
– Siemens AG, Flender-Getriebe
– Alpha Getriebebau
– SEW
Benefits / Advantages
• Excellent wear protection
• High scuffing load carrying capacity
• Very high resistance to micropitting
• Excellent roller bearing wear protection (FE8)
• Increase of efficiency, reduction of temperature
– low friction coefficient
• Excellent viscosity-temperature behaviour (high VI)
• For use at high and low operating temperatures
• High ageing stability
• Good corrosion protection
• Excellent air release
• Low foaming
Nhà phân phối, Đại lý dầu FUCHS Fuchs Renolin PG 460 ở đâu?
Chúng tôi có bán và đại lý phân phối sản phẩm chính hãng của FUCHS Fuchs Renolin PG 460, hãy liên hệ với chúng tôi và để được hỗ trợ về sản phẩm.
Giá dầu mỡ FUCHS Fuchs Renolin PG 460 tốt nhất
Chúng tôi cung cấp dầu mỡ FUCHS Fuchs Renolin PG 460 với giá cả tốt và thời gian giao hàng nhanh chóng.
Mua dầu mỡ FUCHS Fuchs Renolin PG 460 ở đâu?
Chúng tôi có năm kinh nghiệm trong lĩnh vực cung cấp dầu mỡ bôi trơn cho khách hàng công nghiệp, sản phẩm đa dạng và có nhiều ưu đãi khi mua số lượng lớn. Hãy liên hệ với chúng tôi và để được hỗ trợ về sản phẩm.