KLUBER KLUBERplex AG 11-462 Is a white operating and priming lubricant.
Your benefits at a glance
– Reduced maintenance needs
– low contamination of machine environment due to use of white solid lubricants and low lubricant consumption
– very good adhesion even at low temperatures
– product streamlining possible as the product is suitable for gear rim / pinion drives and bearings
– Improved component performance
– less wear due to selected solid lubricants and additives
– very good corrosion protection also when exposed to salt water
Your requirements – our solution
KLUBERplex AG 11-461 and 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components. These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.
Application
KLUBERplex AG 11-461 and 462 have been designed as priming lubricants for gear rim and prinion drives and can also be used as contrast lubricant for checking the drive’s load pattern. In the offshore sector, marine applications and wind power stations subject to salt water, open gears, low-speed rolling bearings, sliding and guide rails, steel cables of winches or cranes and similar components can be effectively lubricated and protected using KLUBERplex AG 11-461 and 462.
Application notes
Priming lubrication
KLUBERplex AG 11-461 and 462 are applied by brush or spatula. For optimum results, we recommend cleaning the surfaces to be lubricated prior to lubrication. To determine the right quantity for your application, the diagram overleaf provides guide values.
Operational lubrication
KLUBERplex AG 11-461 and 462 can be applied by manually operated grease guns or through appropriate central lubricating systems and are sprayable at temperatures down to 0 °C. When applied by spray, an exhaustion device is necessary in order to avoid inhalation of spray mist (see SDS point 2). Provided sufficient relubrication is ensured, short-term thermal loads of up to 200°C are permissible.The lubricant quantities to be used depend on the operating conditions and must be determined for each application individually. Extended exposure to intense sunlight may slightly change the lubricant’s surface colour without affecting its performance.
Nhà phân phối, Đại lý dầu KLUBER KLUBER KLUBERplex AG 11-462 ở đâu?
Chúng tôi có bán và đại lý phân phối sản phẩm chính hãng của KLUBER KLUBER KLUBERplex AG 11-462, hãy liên hệ với chúng tôi và để được hỗ trợ về sản phẩm.
Giá dầu mỡ KLUBER KLUBER KLUBERplex AG 11-462 tốt nhất
Chúng tôi cung cấp dầu mỡ KLUBER KLUBER KLUBERplex AG 11-462 với giá cả tốt và thời gian giao hàng nhanh chóng.
Mua dầu mỡ KLUBER KLUBER KLUBERplex AG 11-462 ở đâu?
Chúng tôi có năm kinh nghiệm trong lĩnh vực cung cấp dầu mỡ bôi trơn cho khách hàng công nghiệp, sản phẩm đa dạng và có nhiều ưu đãi khi mua số lượng lớn. Hãy liên hệ với chúng tôi và để được hỗ trợ về sản phẩm.