Dầu KLUBER KLUBERsynth UH1 14-1600

KLUBER KLUBERsynth UH1 14-1600 Is a synthetic high-performance lubricating grease for the food and pharmaceutical processing industry.

Benefits for your application

– Improved pumpability due to its soft consistency
– Component life enhanced resulting from a special thickener with good adhesion and good corrosion protection
– ISO 21469 certified – supports the compliance with the hygienic requirements in your production.

Description

KLUBERsynth UH1 14-1600 is a synthetic high-performance  lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. KLUBERsynth UH1 14-1600, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

Application

KLUBERsynth UH1 14-1600 has been especially designed for applications in machines and installations used in the food processing and pharmaceutical industries where contact with the food product is technically unavoidable. It is intended for use as a fluid gear grease for the immersion lubrication of toothed gears, worm gears and chains operating more smoothly with a softer grease.

Application notes

KLUBERsynth UH1 14-1600 is applied by brush, spatula, grease gun or via central lubrication systems. Before substituting KLUBERsynth UH1 14-1600 for other greases, thoroughly clean all lubrication/friction points. If the greases are miscible, relubrication is sufficient. In gears, however, used grease should be removed as far as possible. The product can normally be applied by means of centralised lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed with the system manufacturer for each individual application. We will be pleased to provide assistance in this matter. A special feature of this product is the very fast increase of worked penetration. It quickly becomes very soft (approx. 6 months) thus falling beyond the indicated worked penetration range.