Dầu KLUBER Stabutherm GH 462

KLUBER Stabutherm GH 462 Is a high-temperature lubricating greases.

Benefits for your application

– Reduction of lubricant costs due to lower consumption
– Reduced waste water disposal costs due to excellent water resistance
– Considerable reduction of rolling bearing costs due to good wear protection, good load- carrying capacity and excellent corrosion protection
– Trouble-free operation of machines due to good pumpability and metering in central lubrication systems
– Low wear at high temperatures

Description

STABUTHERM GH 461 and STABUTHERM GH 462 are high temperature lubricating greases based on mineral oil and polyurea. They have a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 461 and STABUTHERM GH 462 feature highly effective anti-wear properties. The greases are very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 461 and STABUTHERM GH 462 are resistant to oxidation and provide reliable protection against corrosion.

Application

STABUTHERM GH 461 and STABUTHERM GH 462 are particularly suitable for applications in smelting works and rolling mills, especially for high-temperature lubrication points supplied through a central lubrication system, e.g.

– drive rollers in continuous casting installations (slabs and billets)
– conveyor rollers in continuous furnaces

Lubricants for such applications must meet extremely high requirements regarding operating temperature, scaling, water and ensuing corrosion.

STABUTHERM GH 461 and STABUTHERM GH 462 are also suitable for other high-temperature applications, such as:

– annealing furnaces, drying stoves
– plain bearings in foundry cranes
– hot rolls in cardboard manufacturing plants
– road tarmacking machines
– shut-off gates in bulk material installations
– cooling beds, conveyor systems
– rotary kilns
– machines and installations in the automotive, beverage, glass and ceramics industries

Application notes

STABUTHERM GH 461 and STABUTHERM GH 462 can be pumped through all common types of lubrication systems. Pipe friction values were determined in order to assess the pumpability in central lubrication systems. The results obtained at different temperatures are illustrated in diagrams 1 and 2 on pages 3 and 4. Diagram 1 shows the resistance to pumping per meter of pipe with a diameter of 7 mm; diagram 2 shows the values of a pipe with a diameter of 16 mm. The pipe friction values were measured with a Shell DELIMON rheometer system.